Causes of Casting Deformation and How to Avoid Deformation

Both manufacturers and users hope that the quality of castings will become better and better, and there will be no problems. Because the casting is deformed, it will cause the manufacturer to waste money, manpower, etc., and also delay the user’s time and use. So how to avoid  casting supplier ?

Due to the large difference in the shape and size of the steel castings, if one of the steps is improperly operated, or the product design of the castings does not meet the requirements, etc., the castings will be deformed.

There are roughly the following types of deformation: the temperature in different cavities of the casting is different, and the gap is relatively large, which is caused by the uneven cooling time of the steel casting manufacturer in the operation; the design position of the mold is unreasonable; the manufacturer is not accurate enough in the design of the casting process , resulting in uneven shrinkage.

In the face of casting deformation, how will the manufacturer solve this situation? First, control the temperature of the casting to ensure that the overall temperature in the cavity is consistent; when the temperature is too high, the manufacturer appropriately extends the cooling time of the casting

Regarding the deformation of castings, there may be other factors. To do a specific analysis of specific problems, do not operate blindly.

 

 

 

like：

How to choose a casting manufacturer that suits you

How to choose a good casting supplier ?    

Points to pay attention to when choosing a casting factory